DW1002 Double-Arm Anchor Construction
If everyone works hard like Yugong, the mountain can be moved; If everyone has the heart of Jingwei, it is not difficult to fill the sea. Life requires struggle, failure is the mother of success, struggle is the father of all things, and the flower of success is always rooted in the soil of struggle.
DW1002 full hydraulic rock drilling rig is a small and medium-sized rock tunnel hydraulic rock drilling equipment independently R&D and manufactured by ZSIM. It is applicable in tunneling and anchoring in tunnels, tunnels in the fields of mining, hydropower, railways, highways, etc. The drilling rig adopts an advanced full hydraulic rock drilling system and is equipped with an anti-stuck drill device. The drilling rig has a compact structure and a retractable drill arm. It can perform multi-angle and multi-directional drilling positioning relatively parallel to the working section. The climbing ability is ≤18%, the travel speed 15km/h, and the transfer speed is fast. It is an excellent underground mining and tunneling mechanized drilling equipment.
| Drilling of blasting hole, anchor holes slot holes advanced grouting holes, as well as self-propelled anchor installation. The equipment can operate at a maximum altitude of 4000m and the operating environment temperature is -20 ~ 45°C. It can operate normally in dusty and humid tunnels, underground and other environments. Tunnel excavation blasting holes. Tunnel engineering drainage and gas drainage. 1. The equipment adopts a solid and sturdy liftable protective operating roof to ensure the safety of operators. 2. Applicable section 13m*9m, section area up to 100 square meters. 3. The arm can rotate 360°, and the precise drilling arm can drill holes in all directions with horizontal propulsion, so as to achieve real no-dead-angle drilling. 4. The walking speed 15km/h, the climbing ability <18%, the transfer speed is fast, and it can adapt to various harsh terrains. 5. The rock drilling rig is powered by a 4-cylinder diesel engine + electric motor. It has an excellent power system, diesel engine travel, electric construction (convenience and energy saving), and improves the working environment in the cave. 6. The direct control rock drilling system is equipped with an automatic anti-stuck drill function. The rock drilling is automatically returned. The impact, rotation and propulsion have their own hydraulic pumps. The low-pressure and high-flow hydraulic system takes into account efficient rock drilling and prevents the drill rod from locking, so as to improve the drill rod consumption connected to the rock drill and reduce the operating cost. 7. The rock drilling rig is equipped with an 80-meter-long cable, which is controlled by the motor for retraction and release. It is efficient and safe. |
The market is the sea, the quality is the ship, and the brand is the sail. For more than ten years, ZSIM has been focusing on the development of engineering technology equipment, manufacturing, scientific and technological R&D, and technical training. It has been focusing on non-standard, special, personalized, and customized high-end equipment manufacturing and services. It adheres to the management of lean production, rewards customers with high-quality products, and pioneers and mades progress, so as to establish a good corporate reputation.
ZSIM believes that only by taking the lead, winning by surprise, and constantly creating new systems, new products, new markets, and new situations that overwhelm competitors can an enterprise be invincible.
