Model
DWS901 Anchor Injection Drilling Rig
  • Section area: 18.5*11m
  • Boom: 1
  • Overall weight: 33,000 kgs
Description
Summary
DWS901 anchor injection drilling rig is a tunnel support equipment in tunnel drilling and blasting construction, which is widely used in railway, highway, water conservancy, metallurgy and other fields of tunnel roadway, culvert support etc. Full hydraulic drive, integrating drilling, grouting, anchor rod installation, prestress application, anchor rod positioning, information upload and other systems, with gas alarm function. With drilling station, anchor station, resin roll station, grouting station, each station switch flexible and accurate positioning. Pre-installed 9 bolts at a time, can be compatible with φ22, R25, R32, R36 and other specifications of bolts. It integrates the functions of bolt pushing, expanding shell head opening, resin roll stirring, bolt locking, prestress application (prestress adjustable), grouting and so on. Supports a maximum of 5m external resin rolled bolt and expanded shell bolt installation, a maximum of 4m internal resin rolled bolt installation, and a minimum of 3m length bolt installation. Equipped with adjustable grouting machine, automatic pulping, preset water injection, water cement ratio, automatic control of cement injection amount. Equipped with a grouting recorder, the grouting pressure and flow rate can be monitored in real time, and the grouting process can be completed directly through the grouting station of the bolt power head.
Characteristic
· Real-time data display
· Bolt information management
· Interaction between man, machine and rock
· Automatic support construction
· Automatic prestressing
· Dual control mode of the whole machine
· CAN bus distributed control
· Three level anti-stuck system
parameter


ParameterDWS901
Overall dimensions (length * width * height)15900*2490*3200
Applicable section for radial anchor rod (b * h)18.5*11m
Drilling depth4500mm
Anchor rod length  4500mm (Build-in-resin bolt 4000mm)
Main motor power55kw
Hydraulic oil tank capacity350L
Overall weight33000kg
Drilling station
 Rock drill power18kw
Propulsion compensation850mm
 Drilling hole diameter

Φ41~89mm

Drilling pipe length4915mm
Acnhor rod station
Number of anchor rods loaded at one time 9pcs
 Anchor rod power headMG30
  Prestressed function

Yes

 Propulsion compensation850mm
 Resin capsule station
Resin capsuleφ35mm
 Push methodGas push
 Control mode

Manual valve control

Drilling arm
Horizontal rotation360°
Vertical rotation360°
Stretch1800mm
Chassis
Diesel engine power220HP/164kw
Turning direction±38°
  Tire specification14.0*R24
 Rear axle swing angle±8°
 Approach angle/ departure angle 21°/16°
 Travel speed Level pavement 14 (km/h)
Minimum ground clearance370mm
Driving brakeWet bridge, hydraulic brake
Fuel tank volume160L
 Electrical system
Total engine power67.9kw
Voltage380v
 Motor speed1480r/min
Battery 2*12v/120Ah
Driving light/ electrical system24v
Work light 220v
   Cable coil length80m
Gas supply system
Flow rate0.85m³/min
Operation air pressure 0.8Mpa
Water supply system
Flow rate70L/min
Working water pressure0.8~1.5Mpa
 Work platform
Work section (b*h)15*12.5m
 Bearing capacity400Kg
Grouting system
Cement discharge capacity1.8m3/h
Grouting pressure1~4Mpa
 Motor power2.2kW (grouting), 2.2kW (mixing)
Automatic pulping systemYes
 Hopper volume130L


Case
Message
You can leave your message, and we will be able to contact you conveniently!