Model
ZMLD16 Hydraulic Drilling Jumbo
  • Main mortor power: 37kw
  • Maximum cover area: 16㎡
  • Overall weight: 7,400kg
Description
Summary
ZMLD-16 hydraulic drilling jumbo is applicable in blasting hole operation in the roadway excavation of small and medium section mines, hydropower and other fields. The applicable section is 2.2×2.2m--3.5×3.5m, all-round no dead angle drilling with 360 degree rotation in this range.
Characteristic
· High efficiency hydraulic rock drill, strong bending resistance, fast drilling speed, small tool wear, compact height and size, effectively improve the adaptability of drilling side wall holes.
· Roof lifting, leg support and auxiliary action are directly controlled by the direct control multi-way valve, and the pipeline is simplified.
· The failure rate is extremely low and easy to maintain.
parameter


ParameterZMLD16
Overall dimensions (L * W * H)7085*1350*1935mm
 Applicable section (W * H) 

2.2×2.2 3.5×3.5m

 Maximum cover area16㎡
Main mortor power37kW
Overall weight7400kg
Rock drill
Qty1
Impulse power8kW
Impulse pressure11~15MPa
 Impulse frequency55~65Hz
 Each impact power86~117J
Rotary pressure

≤17MPa

 Rotary torque

≤400N.m

 Turning speed

≤300r/min

Gas slagging pressure0.5~1MPa
Gas slagging discharge rate4m3/min
Gas consumption for oil mist lubrication0.2~0.4m3/min
Oil consumption for oil mist lubrication2~3mL/min
 Weight72Kg
Drilling arm
 Qty1
 Single arm covered area14.5m2
 Turning anglePositive 180°, negative 180°
Lifting angle+37° ~-20° 
Swing arm angle from side to side

Left 28°,  right 28.7°

 Propeller tilt
Downward 91°, upward 1°
Chassis
Travel mode Caterpiller type
Travel speedLevel pavement 1 Km/h
 Departure angle18°
 Climbing ability

30°

 Minimum ground clearance345mm
 Transmission system Motor reducer
Stable leg in working conditionStable front and rear legs
Engine brandYuchai
 Engine power36kW
 Fuel tank volume100L
Hydraulic system
 Main hydraulic pump rated pressure25MPa
 Main hydraulic pump displacement62mL/r
Auxiliary hydraulic pump rated pressure23MPa
 Auxiliary hydraulic pump displacement32mL/r 
High pressure oil/ oil return filtration accuracy10μm
 Hydraulic tank volume180L
 Propeller
 Propulsion drive modeCycloidal motor
 Propeller lengthUpper layer 2120mm,  lower layer 2200mm
Total propeller stretchy length Upper layer 3530mm, lower layer 2335mm
Drill pipe length Upper layer 2800mm, lower layer 2000mm
Single pipe drilling depth Upper layer 2470mm, lower layer 1670mm
Drilling hole diameterΦ33-φ45
 Maximum propulsion force9000N
 Propulsion compensation480mm
Gas supply system
Outside gas supply

≥4 m3/min   10kg

 Lubricating oil supply mode Electromagnetic pump pulse control
 Oil consumption for oil mist lubrication2~3mL/min
Water system
 Booster pump power3kW
 Rated displacement4L/min
 Working air pressure0.8~1.5MPa
 Electrical system
Total input power40kW
 Voltage/ Prequency380V/ 50Hz
 Main motor rotary speed1480r/min
 Starting modeStar/ triangle
Satety protection devicesPhase sequence protection protection/ overload protection/ short circuit protection
Rechargeable battery2~12v/ 80Ah
 Travel lights24v
Working lights220v
 Electronic control system24v



Case
Message
You can leave your message, and we will be able to contact you conveniently!