Model
DW801 Rock Drilling Rig
  • Operation area: 80m2
  • Motor power: 55kW
  • Overall weight: 23000kg
Description
Summary
DW801 customized rock drill rig is applicable in blast holes and anchor holes drilling of tunnels in the fields of mines, hydroelectric power, railways, highways and other fields. The machine adopts full hydraulic drive, and the engine provides walking power. High lifting (up to 9 meters horizontally and 12 meters vertically). Compact structure, low center of gravity, flexible, stable work.
Characteristic
· Customized drill rig
· The maximum excavation area is 80 square meters.
· The combination of rock drill and hydraulic system can improve the utilization rate of rock drill.
· Advance small catheter operation.
· The simple and convenient hydraulic control operating platform provides a good view and makes the operator faster to get started.
parameter
ParameterDW801
Overall dimensions (length * width * height)15950*2490*3000/3700mm
Applicable section for driving (b * h)11.2*9m
Applicable section for anchor rod (b * h)17.7*12.5m
Drilling diameterφ43mm-φ89mm
Drill hole depth4305/4915/5525mm
Motor power55kw
Hydraulic oil tank capacity350L
Overall weight23000kg
Drilling arm
RotationPositive 135°/  negative 225°
Propulsion downward/upwardDownward 3°/ upward 90°
Chassis
Maximum power of diesel engine220HP/1644kw
Turning direction±38°
Rear axle swing angle±8°
Approach angle/departure angle 21°/16°
Driving brakeWet bridge and hydraulic brake
Fuel tank 160L
Electrical system
Total power61kw

Voltage

380v
Battery 2*12v/120Ah
Driving light 24v
Work light 220v
Electrical system24v
Gas supply system
Flow rate0.36m³/min
Operation air pressure 0.7Mpa
Water supply system
Flow rate70L/min
Working water pressure0.8~1.5Mpa


Case
Message
You can leave your message, and we will be able to contact you conveniently!