Parameter | CYTM45 |
---|---|
Overall dimensions (L*W*H) | 10370*2060*2500mm |
Applicable cross-section (b*h) | 5.2m*6.6m |
Drill hole diameter: | φ38mm- φ43mm |
Total length of the mast | 3420mm |
Anchor rod length: | 2000mm |
Hydraulic oil tank capacity | 170L |
Whole machine weight | 12100kg(±300) |
Drilling arm | |
Drill arm angle(downward/upward): | 32°/55° |
Drill arm swing angle: | ± 35 ° |
Drill arm rotation angle: | ± 120 ° |
Drill arm horizontal extension length: | - 900mm |
Web grabbing arm | |
Big arm downward angle | 25° |
Big arm swing angle: | ±45° |
Big arm rotation angle: | ±180° |
Big arm horizontal telescopic length: | 1455mm |
Small arm angle(downward/upward): | 90°/90° |
Travel mechanism | |
Engine power: | 60kw (2200rpm) |
Travel speed: | ≤12km/h |
Rear axle swing angle: | 7°(±1°) |
Climbing ability | 24% |
Hydraulic pump station | |
Rated power of electric motor | 55kw |
Rated voltage of electric motor | 380v |
Rated speed of electric motor | 1475r/min |
Electrical system | |
Flow rate: | 0.35m ³/ Min |
Operation air pressure | 0.3-0.8Mpa |
Water supply system | |
Flow rate: | 52L/min |
Working water pressure: | 0.8-1.2Mpa |