Model
ZMLH08 High Arm Anchor Drilling Rig
  • Drilling diameter: φ90-φ130mm
  • Motor power: 55kW
  • Overall weight: 15,000 kgs
Description
Summary
ZMLH08 high arm anchor drilling rig is a type of high lift arm drill rig, it is applicable in slope stabilization, tunnel support, fan anchoring around and side walls of tunnels, advance geological prediction in tunnels, cutting holes in tunnels, rock coring, continuous drilling and sampling of rock and soil layers. The operation mechanism adopts full hydraulic drive. The rock drill, the coring power head and the drilling power head can be replaced to realize the advance detection drilling hole and the horizontal coring operation. The whole machine adopts the engine to provide the walking power.
Characteristic
· Horizontal lifting height 9.2 meters, vertical height 11 meters, compact structure, low center of gravity and stable work.
· Proportional valve and variable piston pump with load feedback system, with the functiosn of power protection and pressure cut-off.
· Rock drill stroke 4 meters, and the length of the propulsion beam can be adjusted according to the depth of the bolt hole and the drilling hole.
· Strong drilling ability, wide application range, easy maintenance, high drilling efficiency.
parameter
ParameterZMLH08
Overall dimensions (Length x Width x Height) 10430*2440*2960mm
Main motor power 55kW
Hydraulic oil tank capacity350L
Total weight15000Kg
Horizontal swing/ rotation+40°, -40°
Propeller tiltDownward 147°, Upward 8°
Propeller compensation1000mm
KW/Diesel engine power100HP/ 73.5kW
Approach/departure angleApproach angle 22°, Departure angle 20°
Travel speedLow speed 1.5Km/h, High speed 2.2Km/h
Climbing gradient25°
Fuel tank capacity170L
min/Flow rate350L/min
Operating air pressure0.6-0.8MPa
min/Flow rate30L/min
Operating water pressure0.2-0.8MPa
Total motor power62(55+3+4)kW
Power supply voltage380V
Ah/Battery voltage/capacity2 x 12V/ 80Ah
Travel lighting voltage24v
Electrical system voltage24v
Rock drill modelRD18
Drilling diameterφ43-φ76mm
Drill rod length4306mm
Drilling depth4000mm
Drilling speed0.8-2m/min
 Power head output speed45-55rpm
 Power head maximum torque6000N.m
 Compensation stroke1000mm
 Power head maximum lifting force≤40kN
 Power head maximum feed force15-20kN
 Power head maximum stroke4000mm
 Drill rod specificationsΦ76*1500/2000/3000mm
 Drilling diameterφ90-φ130mm
 Breaking methodImpact rotary type
 Compatible impactorsCIR series, DHD series


Case
Message
You can leave your message, and we will be able to contact you conveniently!